The SmartFold can be folded down to clear the bench and then returned in seconds to be immediately ready for use

QuikSwap cutting tools, sightline strip accuracy and anti-sag design all in a portable cutter.

Keencut’s unique Lift-and-Hover (patent pending) technology enables fast single-handed, and accurate alignment of all material, irrespective of thickness. Lower the clamping bar until it hovers just above the material surface with zero sag, even on the longest 3.6m (142") length cutter, then use the sightline strip to see where the cut will be made, and finally, fully engage the clamp and cut – it’s so simple.

The self-adjusting track roller system fitted to the QuikSwap tool heads provides a strong and smooth movement up and down the length of the cutter bar, with zero sideways movement to ensure a perfect straight line. This, coupled with rigid blade clamping gives perfect blade control and spot-on accuracy, so less wastage and mistakes. On the FreeHand, the underside of the cutter bar has two silicone strips that will grip to the material surface preventing any chance of it slipping.

The ease of use makes it possible for even first time users to cut confidently and accurately with the Evolution3 FreeHand. The sightline strip guides you to achieve perfect accuracy and the heavy base and solid structure create a stable cutting platform.

The entire Evolution3 range has been built to last using high quality materials and well tested engineering principles. The cutting head bearing system guarantees perfect blade control even with the most difficult of materials. Keencut make the majority of components on its high-tech CNC machines keeping tolerances and quality under constant control, this assures exceptional accuracy and total reliability.

The Evolution3 Double Graphik tool head comes as standard and has two individual blade holders for two-way cutting. The blades are stronger and more stable than regular blades making the Double Graphik tool ideal for vinyl, banner, cardboard, PVC foamboard up to 13mm (1/2"), foam-centred board, corrugated plastic, paper, pop-up and roll-up materials.

The SmartFold includes an integral polymer cutting strip for use with the Evolution3 Fabric tool head to cut textiles and fragile materials. A simple push button at each end of the bar allows the cutter to be set on any of four cut lines, extending the life of the strip. There is no need for a separate cutting mat.

Within a few seconds, you can fold the SmartFold down to clear your bench for other work and then simply flip it back up ready for action.

Semi-rigid materials:

• Corrugated cardboard = 13mm (1/2")
• PVC foamboard = 13mm (1/2")
• Corrugated plastic = 13mm (1/2")
• Foam centred board = 13mm (1/2")

• Cast acrylic / Plexiglas = 3mm (3/32") scoring only
• Aluminium composite panel, e.g. DiBond = 3mm (3/32") Rocker tool head only, for occasional use

• Banners
• Pop-ups
• Magnetic sheets
• Film
• Self-adhesive vinyls

• Tissue paper
• Wallpaper