CAD-CUT Gorilla Grip II Thermal Heat Transfer Materials for Vinyl Cutters

Cad-Cut Gorilla Grip is designed for detailed design.
Cut lettering as small as 3/8".

	Color Part #	19" x 5 yards $47.50	19" x 10 yards $90.40	Color Part #	19" x 5 yards $47.50	19" x 10 yards $90.40
	White 190GG2001			Kelly Green 190GG2008
	Black 190GG2002			Hot Pink 190GG2059
	Red 190GG2003			Vegas Gold 190GG2060
	Royal 190GG2004			Metallic Gold 190GG2061
	Gold 190GG2005			Metallic Silver 190GG2062
	Navy 190GG2006			Recommended fabrics: Woven Nylons, Nylon Mesh, Knit Nylons, Spandex blends, Tactel Nylon, Cordura, 100% Cotton, 100% Polyester, Cotton/Poly Blends



Application Instructions for Gorilla Grip Cut and Weed Instructions Remove Pink Plastic Liner from adhesive side before cutting. Feed material into cutter so that the Polyester carrier is on the bottom. Cut graphic in reverse(mirror image), weed away ecess material leaving only the desired graphic on the carrier for the hear transferring. Cut and Weed Instructions Preheat substrate to sufficiently remove moisture and wrinkles. Position design on garment with polyester carrier side up. Cover with Kraft Paper before pressing. Heat apply- Temperature:320° F; 160° C Time: 2 seconds Pressure: Light Peel Mylar cold, the design must cool completely before peeling the Poly-carrier. Once cool, remove carrier by peeling carefully. Cover with Kraft Paper and hear seal for 10 seconds Temperature:320° F; 160° C Time: 10 Seconds Pressure: Light Accessories for Apparel Transfer